1, avoid being a coach, mistakenly mistaken people, endless harm.
In short, in one sentence: the vehicle in the running-in period is as delicate as a baby. In the early days of his growth, you care for it, so it will be different from its service life or return to you..... .
2, avoid driving operation careless
After the start of the crane, the temperature should be raised in place, and the water temperature should reach the starting temperature before starting. Choose a good road during driving, keep driving at medium speed, try to avoid sudden acceleration and sudden braking, the throttle should be small, the operation should be light, and the sound and temperature of the engine should be kept at all times.
3, avoid high speed driving
There are speed regulations for the new car in the initial stage of the car, the domestic car is generally stipulated within 40-70km / h; the imported car is generally specified within the first 1000km, when the throttle is fully open, the speed does not exceed 80% of the maximum speed, and the requirements Observe the engine tachometer and the speedometer during use so that both the engine speed and the vehicle speed work at medium speed.
4, avoid the initial maintenance
When the first insurance is completed, it should be repaired in time according to the requirements of the manufacturer. Do not think that running a thousand or eight hundred kilometers has no effect on the car. It is necessary to know that although the engine is iron or all-aluminum, it does not need to be taken care of.
5, bogey full load operation
If the new car is loaded with full load, it will cause damage to the machine. Therefore, within the first 1000km, the domestic car can not exceed 75%-80% of the rated load; the imported car can not exceed 90% of the rated load.
6, avoid using oil is not standardized
The oil used in the new car should not be lower than the label specified by the manufacturer.
7, avoid running long distance
Long-distance running of the new car with the car will increase the time for continuous operation of the engine, resulting in increased wear and tear on the parts.
8, avoid dismantling the speed limit film in advance
The speed limiter is a throttle device mounted between the carburetor and the intake pipe. The driver should not remove it in advance, but should remove it after the initial speed of 1000km and the initial maintenance. Imported cars generally do not have a speed limiter, and the driver himself controls the speed.
9, avoid emergency braking
The emergency brake not only shocks the braking system in the running-in, but also increases the impact load of the chassis and the engine, so do not use emergency braking within 300km of the initial driving. If there is an emergency, try to step on the clutch pedal first to reduce the impact on the engine.
10, avoid not shifting in time
You should shift gears in time, you can't use high-speed low-end driving or low-speed high-end driving, and don't use a gear for a long time.
