The rubber around the sealing window is also easily damaged, and moisture and the like easily penetrate into the wall. Thick plywood walls are used on many RVs, and plywood is also highly susceptible to moisture. The use of advanced reset seal silicones throughout the area generally prevents these leaks from occurring.
Learn how to remove the bonnet of the air conditioner on the roof. Remove the metal sheet to protect the metal cooling wing. Use water pipes and sprayers to remove accumulated dirt and leaves. When cleaning these parts, make sure that the parts are not connected to the power supply, otherwise the personal safety of the cleaner will be jeopardized. These jobs need to be done during the hot season each year before you need to use the air conditioner. If you live in the South most of the time, it is best to do it twice a year.
In order to ensure the normal and effective operation of the air conditioner in the car, the air conditioner filter is often cleaned. Air conditioning filters with excessive dust and stains will reduce the cooling capacity and efficiency of air conditioners. The filter is located in the RV below the wind panel on the air conditioning unit. Most RV air conditioning filters must be carefully and thoroughly rinsed in warm water. They need to be air dried in the air before they are put back. If the filter is torn or dirty, the RV air conditioner filter should be replaced. Check and clean the filter at least once a month. After the filter of most RV air conditioning units is removed, the evaporator coil inside can be seen. Illuminate by hand, check the coils for any dirt or debris, and if so, use a very flexible vacuum cleaner accessory to carefully remove dust and dirt. If you are willing to climb the roof of the car, you should also clean the external condenser coil on the air conditioner. This requires removing the shield from the air conditioner, usually with a few screws to pin it.
Learn how to remove the bonnet of the air conditioner on the roof. Remove the metal sheet to protect the metal cooling wing. Use water pipes and sprayers to remove accumulated dirt and leaves. When cleaning these parts, make sure that the parts are not connected to the power supply, otherwise the personal safety of the cleaner will be jeopardized. These jobs need to be done during the hot season each year before you need to use the air conditioner. If you live in the South most of the time, it is best to do it twice a year.
In order to ensure the normal and effective operation of the air conditioner in the car, the air conditioner filter is often cleaned. Air conditioning filters with excessive dust and stains will reduce the cooling capacity and efficiency of air conditioners. The filter is located in the RV below the wind panel on the air conditioning unit. Most RV air conditioning filters must be carefully and thoroughly rinsed in warm water. They need to be air dried in the air before they are put back. If the filter is torn or dirty, the RV air conditioner filter should be replaced. Check and clean the filter at least once a month. After the filter of most RV air conditioning units is removed, the evaporator coil inside can be seen. Illuminate by hand, check the coils for any dirt or debris, and if so, use a very flexible vacuum cleaner accessory to carefully remove dust and dirt. If you are willing to climb the roof of the car, you should also clean the external condenser coil on the air conditioner. This requires removing the shield from the air conditioner, usually with a few screws to pin it.